文章检索

  • 检索
  • 检索词:
  • 高级检索
您是今天第 1055位访问者
您是第 3721667 位访问者
一种高精确度偏置反射面天线模具设计
A high-precision mould design method of offset-reflector antennas
投稿时间:2018-02-22  修订日期:2018-03-23
中文关键词:反射面  天线  模具  高精确度
英文关键词:reflector  antenna  mould  high-precision
基金项目:
作者单位
江文剑 China Academy of Space Technology(Xi’an)Xi’an Shaanxi 710000China 
史 明 China Academy of Space Technology(Xi’an)Xi’an Shaanxi 710000China 
杨亚宁 China Academy of Space Technology(Xi’an)Xi’an Shaanxi 710000China 
摘要点击次数: 126
全文下载次数: 83
中文摘要:
      卫星使用频段的逐渐提高对星载天线反射器的型面精确度提出了越来越高的要求。模具设计和制造是制造高精确度反射器的关键技术之一,温度对模具的影响主要表现在型面精确度和热膨胀变形。建立了一个偏置抛物反射面天线成型模具的设计补偿公式,并对该补偿公式进行了理论推导、仿真分析和试验验证。结果表明,基于该补偿方法,模具在反射器固化温度下型面精确度达到了0.05 mm均方根(RMS),能够有效降低模具热变形对反射面天线型面精确度的影响。
英文摘要:
      With the gradual increasing of utilized satellite bands, the requirement on the surface accuracy of reflectors is growing higher rapidly. The mould design and manufacture is one of the key factors of manufacturing higher accuracy reflectors. The mould properties would be influenced by temperature in the surface deviation of the Root Mean Square(RMS) and the thermal expansion deformation. A mould surface compensation formula of an offset parabolic mould is established. The compensation formula is theoretically derived, simulated and verified. Results show that the mold surface accuracy achieves 0.05 mm RMS at the curing temperature of the reflector by this compensation method; the influence of the mould’s thermal deformation on the antenna surface accuracy can be effectively weakened.
引用本文:江文剑,史 明,杨亚宁.一种高精确度偏置反射面天线模具设计[J].太赫兹科学与电子信息学报,2018,16(4):653~657
DOI:10.11805/TKYDA201804.0653
学科分类代码:
查看全文  查看/发表评论  下载PDF阅读器

分享按钮