模拟离子源注入型IH加速器研制进展
作者:
作者单位:

作者简介:

通讯作者:

基金项目:

伦理声明:



Development of ion source injected IH mode Linac
Author:
Ethical statement:

Affiliation:

Funding:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    离子源注入型交叉手指型横电模(IH)加速器有望发展成为一种紧凑的、低功耗的离子加速器。中国工程物理研究院流体物理研究所研制了一台将质子束从0.04 MeV加速到2.0 MeV的离子源注入型IH加速器,目前已经完成了该加速器的设计加工和束测平台搭建,并进行了初步的束流测试试验。实测束流传输效率为32.77%。束流实验结果与设计参数基本吻合,证实了离子源直接注入型IH加速腔加速低能粒子的有效性和可行性。

    Abstract:

    Ion source injected Interdigital H(IH) mode Linac has great potential to accelerate high current particle beam with high efficiency and low power consumption. One prototype of this accelerator was developed by Institute of Fluid Physics, China Academy of Engineering Physics. This accelerator was designed to accelerate protons from 0.04 MeV to 2.0 MeV with an IH cavity. The accelerator now has been constructed and tested. Beam test results show that the transmission is about 32.77%, and all parameters are consistent with the designed values, which proves the effectiveness and feasibility of this kind of accelerator.

    参考文献
    相似文献
    引证文献
引用本文

赵良超,石金水,何小中,庞 健,马超凡.模拟离子源注入型IH加速器研制进展[J].太赫兹科学与电子信息学报,2021,19(1):166~169

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
历史
  • 收稿日期:2019-10-20
  • 最后修改日期:2019-11-27
  • 录用日期:
  • 在线发布日期: 2021-03-09
  • 出版日期: