Design of a leakage canceller topology based on six-port network
Author:
Affiliation:

Funding:

Ethical statement:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
    Abstract:

    A circuit topology based on six-port network is presented, which can be adopted to effectively suppress the leakage signal. This six-port network is mainly composed of three 3 dB hybrid couplers and an unequal Wilkinson power divider. Among the two output ports corresponding to the receiving signals, two leakage signals of the transmitting antenna are offset each other for their equal-magnitude and out-of-phase, which is benefit to achieve a high level of transmitting(Tx)-to-Rx isolation in the radar network. In order to demonstrate the Tx leakage canceller, a circuit topology is designed and simulated from 22 GHz to 26 GHz. In the operating band, the isolation of the Tx leakage canceller is lower than -29.5 dB, and it achieves the maximum isolation -44 dB at its center frequency. As shown, the circuit topology efficiently improves the isolation of single-antenna radar system and performs cancellation for the Tx leakage power.

    Reference
    Related
    Cited by
Get Citation

燕秀林,付璇莉,王闻炜,陈春红.基于六端口网络的泄漏对消拓扑结构设计[J]. Journal of Terahertz Science and Electronic Information Technology ,2020,18(6):1040~1044

Copy
Share
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
History
  • Received:August 22,2019
  • Revised:September 21,2019
  • Adopted:
  • Online: December 28,2020
  • Published: